m4.2" barrell in the shorty?
so what are the chances of getting one of the shortys with a 4.2" barrell? (once production starts for them) and keep in mind i am from canada and we have minimum barrell length of 106mm (4.17")
Views: 11
Replies to This Discussion
-
Permalink Reply by Arne Boberg on -
I won't make any promises at this point, but we would like to offer an XR9-SC (Shorty Canadian), once we have gotten through the ITAR red tape. Our first batch of barrels has already been sized to the shorter length, so extended barrels would come in the next batch.
-
Permalink Reply by Canadian Handgunner on -
These would sell like no tomorrow in Canada.
I like the idea of calling it a "Shorty Canadian".
-
Permalink Reply by Justin Kase on
-
Will this version be available in America at the same time as the others? I'm interested in purchasing a shorty to use as a platform for a suppressor, so it needs to have a barrel long enough to be threaded.
-
Permalink Reply by Martin Szegedi on
-
I would support Justin in this request. Ideally a shorty, that by exchanging the barrel can keep a suppressor.
Justin Kase said:Will this version be available in America at the same time as the others? I'm interested in purchasing a shorty to use as a platform for a suppressor, so it needs to have a barrel long enough to be threaded.
-
Permalink Reply by Arne Boberg on
-
You may not have noticed this on our site: http://www.bobergarms.com/photo/albums/canadian-xr9sc
It will become a standard part - the XR9-SC
-
Permalink Reply by Justin Kase on
-
I noticed that, but I just wanted you to know that there are people in America that wanted those barrels. You stated that "once we have gotten through the ITAR red tape" you would sell the CS and that your first batch of barrels are already cut at the shorter length. When will the second batch go out that will have some longer barrels? Will they be available as separate parts or only in a complete gun, initially?
Arne Boberg said:You may not have noticed this on our site: http://www.bobergarms.com/photo/albums/canadian-xr9sc
It will become a standard part - the XR9-SC
-
Permalink Reply by Arne Boberg on
-
The plan was to have the longer barrels offered as separate parts so that anyone can either order them as extra, or order them with the gun.
-
Permalink Reply by Justin Kase on
-
Sounds good. It appears that the barrel recoils a certain distance along with the slide. What is the purpose of this and how much room would that leave in front of the frame for a barrel attachment when in full recoil on the shorty with a 4.2" barrel? Would a suppressor weighing anywhere from 4-10 oz prevent the gun from operating properly?
Arne Boberg said:The plan was to have the longer barrels offered as separate parts so that anyone can either order them as extra, or order them with the gun.
-
Permalink Reply by Arne Boberg on
-
The chances are good - we will be offering the Shorty before the Long anyway.
-
Permalink Reply by Talibani on
-
“…minimum barrel length of 106mm (4.17")” – interesting law, what’s the reason behind it?
-
Permalink Reply by David Atkinson on
-
Pretty much to make all the 4'' revolvers illegal. Nothing else, as far as I can tell.
Talibani said:“…minimum barrel length of 106mm (4.17")” – interesting law, what’s the reason behind it?
© 2012 Created by Arne Boberg.
